Abaqus 2021安装包中“读我”文件翻译（破解文件说明）

0. Uninstall previous SSQ's "SIMULIA FlexNet Server" if one is installed 0. 如果你以前安装过SSQ的"SIMULIA FlexNet Server"，请卸载。 1. Install or update the SolidSQUAD Universal License Server for vendor DSSimulia 1. 安装或者升级针对 vendor DSSimulia 的 SolidSQUAD Universal License Server。    If SolidSQUAD Universal License Server has never been installed on the computer:    如果从来没安装过SolidSQUAD Universal License Server：      - unzip the "SolidSQUAD_License_Servers" folder from "SSQ_UniversalLicenseServer_Core_<release-date>.zip" to any DRIVE ROOT folder X:\ (like C:\, https://www.gofarlic.com\, E:\ etc), so the path will be:      - 从 "SSQ_UniversalLicenseServer_Core_<release-date>.zip"解压文件夹"SolidSQUAD_License_Servers"到任意驱动器根目录（比如 C:\, https://www.gofarlic.com\, E:\ 等等），解压后的目录会像这样：     X:\SolidSQUAD_License_Servers      - unzip the "Vendors" folder from "SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip" to the "SolidSQUAD_License_Servers" folder      - 从"SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip"解压文件夹"Vendors"，将其放置于"SolidSQUAD_License_Servers"文件夹中。      - for Windows as administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers" folder and wait until it completes      - windows用户需要以管理员身份运行 "SolidSQUAD_License_Servers" 文件夹中的"install_or_update.bat"，等到它完成。     - for Linux as root run "install_or_update.sh" from "SolidSQUAD_License_Servers" folder and wait until it completes      - Linux用户需要以root身份运行 "SolidSQUAD_License_Servers" 文件夹中的"install_or_update.sh"，等到它完成。    -- OR --    -- 或者 --    If SolidSQUAD Universal License Server is already installed, but the release-date of "SSQ_UniversalLicenseServer_Core_<release-date>.zip" is newer than the installed one, update the server installation:    如果"SolidSQUAD_License_Servers"已经安装过了，但是"SSQ_UniversalLicenseServer_Core_<release-date>.zip"的 release-date比已经安装的新，那么需要更新下。      - for Windows as administrator run "uninstall.bat" from "SolidSQUAD_License_Servers" folder and wait until it completes      - windows用户需要以管理员身份运行 "SolidSQUAD_License_Servers" 文件夹中的"uninstall.bat"，等到它完成。      - for Linux as root run "uninstall.sh" from "SolidSQUAD_License_Servers" folder and wait until it completes      - Linux用户需要以root身份运行 "SolidSQUAD_License_Servers" 文件夹中的"uninstall.sh"，等到它完成。      - unzip the "SolidSQUAD_License_Servers" folder from "SSQ_UniversalLicenseServer_Core_<release-date>.zip" to any DRIVE ROOT folder X:\ (like C:\, https://www.gofarlic.com\, E:\ etc), so the path will be:      - 从 "SSQ_UniversalLicenseServer_Core_<release-date>.zip"解压文件夹"SolidSQUAD_License_Servers"到任意驱动器根目录（比如 C:\, https://www.gofarlic.com\, E:\ 等等），解压后的目录会像这样：     X:\SolidSQUAD_License_Servers      - unzip the "Vendors" folder from "SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip" to the "SolidSQUAD_License_Servers" folder      - 从"SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip"解压文件夹"Vendors"，将其放置于"SolidSQUAD_License_Servers"文件夹中。      - for Windows as administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers" folder and wait until it completes      - windows用户需要以管理员身份运行 "SolidSQUAD_License_Servers" 文件夹中的"install_or_update.bat"，等到它完成。     - for Linux as root run "install_or_update.sh" from "SolidSQUAD_License_Servers" folder and wait until it completes      - Linux用户需要以root身份运行 "SolidSQUAD_License_Servers" 文件夹中的"install_or_update.sh"，等到它完成。    -- OR --    -- 或者 --    If the release-date of "SSQ_UniversalLicenseServer_Core_<release-date>.zip" is not newer than the installed one but the release-date of "SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip" is newer than the installed one, update DSSimulia module only:    如果"SolidSQUAD_License_Servers"已经安装过了，并且"SSQ_UniversalLicenseServer_Core_<release-date>.zip"的 release-date没有已经安装的新，那么只需要更新下 DSSimulia module：      - unzip the "Vendors" folder from "SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip" to the "SolidSQUAD_License_Servers" folder      - 从"SSQ_UniversalLicenseServer_Module_DSSimulia_<release-date>.zip"解压"Vendors"文件夹到"SolidSQUAD_License_Servers"文件夹      - for Windows as administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers" folder and wait until it completes      - windows用户需要以管理员身份运行 "SolidSQUAD_License_Servers" 文件夹中的"install_or_update.bat"，等到它完成。     - for Linux as root run "install_or_update.sh" from "SolidSQUAD_License_Servers" folder and wait until it completes      - Linux用户需要以root身份运行 "SolidSQUAD_License_Servers" 文件夹中的"install_or_update.sh"，等到它完成。 2. Run setup of DS SIMILIA Suite 2021 2. 运行DS SIMILIA Suite 2021的setup    For Win64 run DS.SIMULIA.SUITE.2021.WIN64.iso > 1 > setup.exe    64位windows用户运行 DS.SIMULIA.SUITE.2021.WIN64.iso > 1 > setup.exe    NOTE: To bypass FlexNET License server check on Windows, set the environment variable    提示：要想通过Windos的FlexNET License server检查，需要设置环境变量      NOLICENSECHECK=true    before starting the setupGUI.exe    在运行setupGUI.exe之前    For Linux64 run DS.SIMULIA.SUITE.2021.LINUX64.iso > 1 > StartGUI.sh    64位Linux用户运行 DS.SIMULIA.SUITE.2021.LINUX64.iso > 1 > StartGUI.sh    NOTE: To bypass the Linux  checks, invoke StartGUI.sh with following exports:     提示：要想通过Linux 的distro检查，需要通过以下export调用StartGUI.sh      export DSYAuthOS_`lsb_release -si`=1      export DSY_Force_OS=linux_a64      export NOLICENSECHECK=true    Select products to install    选择想要安装的产品    DO NOT install original "FLEXnet License server" from setup media!    不要在安装界面安装原生的"FLEXnet License server" ！ 3. In window "License Server configuration" select: "SIMULIA FLEXnet"    In window for "SIMULIA FLEXnet License server" input for "License Server1": 27800@localhost 3. 在"License Server configuration"窗口选择"SIMULIA FLEXnet"    在"SIMULIA FLEXnet License server"窗口"License Server1"那一行里填写27800@localhost 4. Finish setup 4. 完成安装 5. Enjoy! 5. 玩好！ Cracked by TeAM SolidSQUAD-SSQ

由ws00010203 翻译