存储空间不够的问题
Q； 我的程序3.4网格设置加密以后，运行出现了这个错误
大家帮忙亚
result文件如下
************************************************************
---------------------------------------------------------
CCCC HHH PHOENICS Version 3.4.0 - EARTH
CCCCCCCC H (C) Copyright 2001
CCCCCCC See H Concentration Heat and Momentum Ltd
CCCCCCC our new H All rights reserved.
CCCCCC Web-site H Address: Bakery House, 40 High St
CCCCCCC www.cham. H Wimbledon, London, SW19 5AU
CCCCCCC co.uk H Tel: 0208-947-7651
CCCCCCCC H Fax : 0208-879-3497
CCCC HHH E-mail: phoenics@cham.co.uk
---------------------------------------------------------
This program forms part of the PHOENICS installation for:
CHAM
The code expiry date is the end of : Sep 2011
---------------------------------------------------------
************************************************************
prndtl of temperature was 1.0, so EARTH
re-set it to -grnd10.
OK? If not, please choose another value
material properties used are...
denst1
vistrb
visclm
tempr1
mixln1
thrme1
speht1
also, other related settings are ...
usegrx = T
usegrd = T
Number of F-array locations available is 30000000
Number used before BFC allowance is 33317715
* 3D velocity coeffs stored out of core
Number of F-array locations available is 30000000
Number used before BFC allowance is 30611667
* Dependent variables stored out of core
Number of F-array locations available is 30000000
Number used before BFC allowance is 22719027
Number used after BFC allowance is 22719027
F-array too small. Please re-dimension
to at least the size shown below
nftot =34521435 nfmax =30000000 needed =45158739
A：你计算所需要的储存空间 =34521435 而phoenics的最大空间 nfmax =30000000 需要册除needed =45158739 或增大此空间
Q；如何增大？
如何删除？
A；册除就是把计算网格\计算变量减少\储存变量减少\
增大就是把phoenics的数组增大
A；main.for里面的nfdim数组增大,然后编译连接,run private eart
Q；按照您说的做了之后出现这些问题
C:\phoenics\d_priv1>call \phoenics\d_satell\..\d_utils\d_windf\..\phoepath.bat
Adding DIGITAL PHOENICS to path
系统找不到指定的路径。
'df' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
'df' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
'link' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
找不到 C:\phoenics\d_priv1\temp.exe
找不到 C:\phoenics\d_priv1\main.obj
找不到 C:\phoenics\d_priv1\ground.obj
请按任意键继续 . . .
怎么办呀？ df是什么意思？
A：DF means the Compaq FORTRAN Compiler.
If you have not installed the compiler,you can not use ground
to recompile the earexe.
Q：我安装了Compaq FORTRAN Compiler
可是里面没有编辑器呀
不知道是不是得另外安装编辑器？
A：I think you can get the answer from the POLIS with the title,
Documentation /Hard-copy documentation
/Installation of PHOENICS-3.5(or.3.4); TR 110
/Appendix B. Frequently Asked Questions and Troubleshooting
产品
技术文档
热门文章
155-2731-8020